ISSN 1608-4039 (Print)
ISSN 1680-9505 (Online)


lithium intercalation

Negative electrodes of the lithium ionic accumulator condescending to the humidity of electrolyte

The effect of electrolyte humidity on charge-discharge behavior of electrodes from graphite, thin-film amorphous silicon and thin-film composites ``silicon–carbon'' is estimated. Rise of humidity from 50 to 400 ppm is shown to accelerating capacity fade of graphite electrode by order of the magnitude. Electrode with 0.2 μm amorphous silicon film keeps the cyclability in electrolytes with water content up to 3000 ppm however its capacity diminishes upon humidity increase.

On the determination of lithium diffusion coefficient in intercalated materials.

Plenty of papers that concern on techniques of the chemical diffusion coefficient (D) determination and D values in anodic and cathodic materials for Li-ion batteries are reviewed. There are considerable discrepancies in the difference reports about the diffusion coefficient values and their concentration dependencies in various materials. Strong influence of composition, micro- and macrostructure of the materials ts a reason of the discrepancies as well as unequal reliability of different techniques for D obtaining.

Electrochemical properties of foamgraphite

It is experimentally proved, that electrochemical properties of foamgraphite are determined by a mode of the first cycle of a charge (a mode of formation of a superficial layer on carbon). It is shown, that the mode of a charge with application of high density of a current (a mode of short circuit) creates conditions of formation superficial isolation multifunctional layer (IML) on a carbon material mainly from a carbonate of lithium.

Lithium intercalation into titanium dioxide: investigation by electrochemical and photoelectrochemical methods

The electrochemical intercalation of lithium from propylene carbonate solutions into thin film Ti02 electrodes prepared by the heat treatment of Ti support was studied. Photoelectrochemical characteristics of film electrodes were investigated at potentials E corresponding to active insertion/extraction of lithium (1.0 < Е < 2.5 В vs Li/Li+) and inert regions.

Development of a carbon material for negative electrode of lithium-ion battery

The suitability of a number of individual carbon materials for making lithium-ion battery anodes has been examined, their electrochemical activity in the reaction of reversible lithium intercalation from solutions of LiClO4 and LiPF6, in solvents based on propylene carbonate, dimethoxyethane, ethylene carbonate, and diethyl carbonate has been studied. A similar study was made on composite electrodes consisting of two carbon components.

Electrochemical lithium intercalation into thin cadmium-doped carbon films

The electrochemical properties of thin cadmium-doped carbon films were characterized. Cadmium doping is shown to increase the stable specific capacity of lithium intercalation by approx. 1.5 times. After the doping, the potential-time profile shows a long slanting step at 0.050-0.060 V with respect to the lithium reference electrode. The voltammetry and potentiostatic tum-on methods were applied to estimate the kinetic characteristics of lithium intercalation-deintercalation into cadmium-carbon films.

Electrochemical behavior of boron- and cadmium-doped carbon fibers

With the aid of chronopotentiometry, voltammetry, and potentiostatic closure, the electrochemical characteristics of lithium intercalation to polyacrylonitrile carbon fiber was determined, namely, the capacitance, kinetic currents, lithium diffusion coefficient, autocharge currents. The study was made at 298 К in 1 M solutions of LiClO4 in some mixed organic solvents (propylene carbonate – dimethoxyethane 7:3, propylene carbonate – diethyl carbonate 3:1).

Lithium-ionic batteries: the modern state, problems, and outlook

A modern state of developments of lithium-ion batteries, as well as their main problems and the directions of their advancing are reviewed.

Kinetics law of lithium in electrochemical system LiAl/LiI(DAC)/С8CrO3 (DAC)

The lithium intercalation to С8CrO3--electrode from Lil-electrolyte in polymeric matrics on a basic of diacetate cellulose (DAC) was investigated. It was registered that the intercalate LixC8CrO3 forms by dimeasured mechanism through lamella drawing. The appearance of electrode passivation was discovered as result of increase of cathodic polarization. It was surmised that reaction of lithium intercalation is controlling by volume properties of conductive medium.