ISSN 1608-4039 (Print)
ISSN 1680-9505 (Online)


chemical current source

Electrochemical obtaining of thermally expanded graphite for electrodes of chemical current sources

Functions of thermally expanded graphite as a component of electrode of chemical current sources have been shown. Advantages, principles of technology and results of electrochemical obtaining of thermally expanding graphite compounds with sulphuric acid in continuous action electrolyzer were given. Potentialities of creation of porous carbon matrixes without polymeric binder have been demonstrated experimentally.

Microcalorimetry as non-destructive test for batteries

The possibility of microcalorimetry as non-destructive test method for evaluation of quality of batteries are studied. The technique of microcalorimetric measurements is developed. Heat emission of lithium-thionyl chloride cells is investigated. Express method for test of shelf-life of various batteries is developed.

The methods of measurement of internal resistance of chemical current sources (CCS)

The analysis of existing methods of measurement of internal resistance of chemical current sources (CCS) was carried out. Their shortcomings were noted. The method of measurement of full internal resistance the CCS based on the analysis of transient characteristics of a charge from it of the condenser of known capacity is considered.

Electrode material based on multilayer graphene oxide for chemical current sources

The results of the studies of the electrochemical synthesis of multilayer graphene oxide were presented, and the possibility of using it as an electrode material of the supercapacitor was shown. In an alcohol suspension the thickness of the particles of multilayer graphene oxide was less than 0.1 μm with an area of more than 100 μm2. The graphene oxide-based electrode has a high specific capacity of 107 F⋅g-1 and a high charge retention rate of 97% after 5000 cycles.