ISSN 1608-4039 (Print)
ISSN 1680-9505 (Online)


свинцово-кислотный аккумулятор

About corrosion stability of the leaden alloys for stationary battery

The possibility of the definition of leaden alloys deep-corrosion rate permitted to calculate parameters of stationary lead acid battery electrode is explained.

Research of influence of carbon additives in negative active material on work of the lead-acid batteries in partial state of charge mode

Influence of the carbon additive in negative active material (NAM) on a resource of the lead-acid batteries working in a partial state of charge mode is studied. Extreme character of dependence of speed of degradation NAM from the maintenance in it of carbon is confirmed. Perceptivity of introduction of the carbon additive in negative electrodes of the lead-acid batteries working at partial state of charge mode is demonstrated.

Electrochemical Behavior of Pb-Sn-Ca-Al-Ba Alloys in Sulfuric Acid Solution

Electrochemical properties of Pb-Sn-Ca-Al-Ва alloys with the various content of barium are studied. It is established that the additive of barium reduces electrochemical activity of alloys at their cycling, and also reduces hydrogen and oxygen overvoltage.

Accelerated charge method of the lead-acid batteries. 1. Constant current stage of the charge

Strategy of the accelerated mode of the charge, including constant current charge to 80 % state-of-charge and a pulse charge by asymmetric current to a full charge is offered. Results of the first investigation phase devoted to studying of influence of a mode constant current charge on a resource of lead-acid accumulators are presented in this work.

Accelerated charge method of the lead-acid batteries. 2. Constant current charge

Strategy of the accelerated mode of the charge of the lead-acid batteries, including constant current charge to 80% state-of-charge and a pulse charge to 100% is considered. Various modes one – and two-stage constant current charges are studied in this work, and the estimation of influence of these modes on effectiveness ratio of a charge and a heat-up of batteries is yielded. The data, which allows reasonably choose the mode of the first stage of the accelerated charge to 80% state-of-charge, are presented.

Accelerated charge method of the lead-acid batteries. 3. Pulse charge

Strategy of the accelerated mode of the charge of the lead-acid batteries, including constant current charge to 80% state-of-charge and a pulse charge to 100% is considered. Influence of key parameters of a pulse charge (amplitude and duration of charge pulse, duration of a pause, the general duration of a pulse charge) on the efficiency of a charge and a heat-up of batteries are studied in this work.

Measurement of lead-acid battery internalresistance in charging mode

Method and the resultsof measurementof the internalresistance ofbattery duringitschargeanddischarge are described.It was establishedthat the internal resistance ofthe batteryin operatingvoltage range is almost equallywhencharging and dischargingand does not dependon the current.

The effect of modified absorbtive glass mat separators on the efficiency of hydrogen ionization in lead-acid battery mock-ups

The influence of porous structure of the absorptive glass mats manufactured by «Hollingsworth&Vose» (thickness 2.8 mm) and BernardDumas» (thickness 3.0 mm), modified by impregnation with polymeric emulsions on the basis of polyvinylidene fluoride (KYNAR), polyvinylpyrrolidone copolymer with styrene (PVS) and polytetrafluoroethylene (Tf), on the efficiency of ionization of hydrogen in lead-acid battery mock-ups.

Structural and Electrochemical Characteristics of Porous Lead Electrodes with Additive Nanostructured Carbon

The effect of carbon materials of two types was studied: multi-walled carbon nanotubes (“Art-nano” of the NSU “S” brand (TU BU 690654933.001.-2011)) and multilayer graphene (“Art-nano GT” (TU BU 691460594.004–2017), and modifications by treatment with ozone and dimethylformamide (manufacturer LLC Advanced Research and Technology, Belarus) on the structural characteristics, capacity and utilization of the active mass of the negative electrode of a lead-acid battery.

Pages