ISSN 1608-4039 (Print)
ISSN 1680-9505 (Online)


литий-ионный аккумулятор

Application of operando X-ray diffraction to evaluate phase transformations of a LiCoVO₄ cathode

Characterization by in situ or operando methods is very important to deeper understand the chemical and electrochemical processes, as well as the degradation processes that occur during the operation of a lithium-ion battery.

Neodymium-doped lithium titanate as anode material for lithium-ion batteries

Doped lithium titanate is known to be able to reversibly cycle in the potential range from 3 to 0.01 V and this ability depends both on the nature of the dopant and the doping level. In this work Li4Ti5O12 samples doped with Nd in the amount of 0.5 to 2.0% were studied. It was shown that while being cycled in the extended potential range, the samples with the doping level from 0.5 to 1.0% demonstrated the highest capacity.

A comparative study of modified oxidized graphite as material for the negative electrode of lithium-ionic cells

The electrochemical behaviour of modified oxidized graphite has been studied. The samples of such a graphite were synthesized and purified according three various modes. The effect of electrolyte nature, current density, and temperature on electrode discharge capacity was estimated.

Development of a carbon material for negative electrode of lithium-ion battery

The suitability of a number of individual carbon materials for making lithium-ion battery anodes has been examined, their electrochemical activity in the reaction of reversible lithium intercalation from solutions of LiClO4 and LiPF6, in solvents based on propylene carbonate, dimethoxyethane, ethylene carbonate, and diethyl carbonate has been studied. A similar study was made on composite electrodes consisting of two carbon components.

Electrochemical lithium intercalation into thin cadmium-doped carbon films

The electrochemical properties of thin cadmium-doped carbon films were characterized. Cadmium doping is shown to increase the stable specific capacity of lithium intercalation by approx. 1.5 times. After the doping, the potential-time profile shows a long slanting step at 0.050-0.060 V with respect to the lithium reference electrode. The voltammetry and potentiostatic tum-on methods were applied to estimate the kinetic characteristics of lithium intercalation-deintercalation into cadmium-carbon films.

Comparative examination of LiyNixCo1-xO2 materials for lithium-ion battery cathodes

A number of LiyNixCo1-xO2 compounds were synthesised by means of solid-state annealing. The synthesis conditions (the raw components, temperature, duration) were optimized so that phases with y > 0.97 were obtained suitable for making positive electrodes for lithium-ionic batteries. The charge-discharge characteristics of such LiyNixCo1-xO2. electrodes were studied.

Lithium-ionic batteries: the modern state, problems, and outlook

A modern state of developments of lithium-ion batteries, as well as their main problems and the directions of their advancing are reviewed.

Behavior of lithium-manganese spinels as a material for the electrodes of lithium-ionic batteries

The influence of the electrolyte composition on the electrochemical characteristics of lithium manganese spinels Li0.94Mn2O4 and Li0.98Mn2O4 was studied. The spinels were prepared by solid-state reaction and sol-gel syntheses. The parameters under study were the charge and discharge capacities and the Coulombic efficiency of the charge/discharge cycle. The long-term cycling of the cathodes made of the materials obtained was examined.

Lithium-modified manganese oxides as materials for the positive electrode of the lithium batteiy

New phases in the Li2O-MnO2 system were obtained, capable of introducing lithium electrochemically at potentials about 3 V and reversibly. They possess a stable capacity on the level 70-80 mA·hour/g. Due to their low cost, simplicity of synthesis, and high cycling ability, the oxides synthesized show promise as a cathodic material for lithium-ionic batteries.

The lithium – iron phosphate LiFePO4 as cathode material for lithium-ion batteries

The review generalizes the literary data on physical-chemical and electrochemical properties of lithium-iron phosphate connected with perspectives of LiFePO4 use as a cathode material for lithium-ion batteries and published up to 2009 inclusive.

Pages